|
Interface
Detectors
The AGAR ID-200 Series interface detector (ID) enables the
operator to precisely control the interface level in the most
difficult of applications. The system is made of two basic components:
antenna and the power supply / signal conditioning circuitry.
By measuring the energy absorption of the fluid surrounding the
antenna, the interface detector senses the water concentration
in an emulsion regardless of fluid density, viscosity, density,
temperature, pressure or pH. The high frequency signal from the
antenna allows the AGAR ID to see through coatings that may adhere
to the probe, a problem that is common with capacitance probes.
The output can be a simple on/off adjustable relay to activate
a solenoid valve or a 4-20 mA signal used with a control system.
The AGAR interface detector is not limited to oil/water applications
but may be used wherever an accurate interface control is a priority
such as, desalter/dehydrator and production separators, automatic
dewatering of crude and refined storage tanks, waste water treatment
and slop oil recovery systems or virtually any liquid/liquid or
vapor/liquid separation process.
| Brochures |
|
|
 |
ID-201
Interface Detector
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
