 Printable View
|
 |
| ID 200H Series |
| 2 Wire Loop Powered Interface Detector With HART |
|
SYSTEMS:
- ID-201H (½ Inch Shaft)
- ID-202H (1 ¼ Inch Shaft) with Integrated HART Communication Capability
|
|
Description
The ID-200H Series Interface Detectors are 2 wire 4-20mA loop powered probes used for interface measurement and control in all types of liquid/liquid and vapor/liquid separation processes including emulsions and foam. A wide range of models are available for the control of a variety of process installations such as Tanks, Decanters, Dehydrators, Desalters, Coalescers, etc. The ID-200 Series advanced control capabilities can be used to automate upset responses, antifoam and demulsifier chemical feed systems and eliminate cross-contamination of separating phases.
|
| Emulsion Concentration |
0-100% Hydrocarbon/ Water by Volume |
| Process Temperature |
Standard: 32°F to 300°F (0°C to 149°C)
High-Temp: 32°F to 450°F (0°C to 232°C) |
| Ambient Temperature |
-40°F to 185°F (-4°C to 85°C) |
| Pressure Rating |
Up to 3000 PSI |
|
|
| Materials Of Construction |
| Probe |
316 Stainless Steel, Teflon & Peek |
Duplex, Hastalloy, Monel (Others available upon request) |
| Seals |
Aflas and Teflon |
Viton |
|
|
| SH-2"/SS |
2" NPT Seal Housing, 316 Stainless Steel |
| SH-2"/SS |
2" NPT Seal Housing, Carbon Steel |
| CF-¼"/SS |
¼" NPT Compression Fitting, 316 Stainless Steel |
| CF-¼"/CS |
¼" NPT Compression Fitting, Carbon Steel |
| Flange Connections |
ANSI 150# to 1500# |
|
|
 |
| ID-201H Components: Probe, Seal Housing |
|
|
|
| ID-201 |
½" shaft; Standard: 48" (4 Ft.); Minimum: 12" (1 Ft.); Maximum: 120" (10 Ft.) |
| ID-202 |
For probe lengths greater than 10 feet, sturdier 1 ¼" shaft assemblies from 5 foot sections via threaded connections. |
|
|
| ID-201, ID-202 Probe |
Intrinsically Safe: Class 1, Div.1, Groups C & D, T3C (pending)
ATEX: II 1G Ex ia IIB T4 Ga (-40ºC<Ta<+85ºC)
II 1G Ex ia IIC T5 Ga (-40ºC<Ta<+65ºC) |
| Wiring Connections |
Probe Terminal Block #18 AWG Maximum Diameter |
| Power Requirements |
12VDC to 30VDC |
| Current |
3.9mA to 21mA |
|
|
| ID-201, ID-202 |
4 - 20mA Loop Powered HART |
|
|
CERTIFICATIONS
CSA-US Canadian Standards Association/UL Specifications (pending) ATEX European Committee for Electrical Standardization GOST-R Russian Approval for Hazardous Areas and Accuracy JRIIS Japanese Research Institute of Industrial Safety
|
 |
